The following guide outlines a general overview of what wireless temperature sensors are and how they benefit commercial businesses. Feel free to reach out to one of our sensor experts to learn more about how remote IoT temperature sensors can help you.
What are wireless temperature sensors and what do they do?
Wireless temperature sensors are small devices that remotely measure temperatures in a variety of environments and conditions such as restaurants, medical labs and industrial manufacturing
Wireless temperature sensors typically use radio waves such as BLE5, LoRa or Zigbee to communicate with a central hub or gateway. Being wireless saves considerable time and money on installation as there are no cables to run or power outlets to install.
Swift Sensors wireless temperature sensors use the most robust communication protocol BLE5. BLE5 is a global standard that is designed for low-power devices.
Wireless temperature sensors can be used to monitor the temperature of a room, a walk-in cooler, medical cryogenic freezer, or industrial machine.
One of the big advantages of IoT wireless sensors is that they can also trigger alarms or notifications. For example, if the temperature exceeds a certain threshold, a notification is sent to the customer.
Wireless temperature sensors are a type of Internet of Things (IoT) device, and they offer a number of benefits over traditional wired temperature sensors. They are easier to install, since there is no need to run wires from the sensor to the central hub. They are also more reliable, since there is no risk of interference from other electrical devices. In addition, wireless temperature sensors can be monitored remotely, which makes them ideal for use in settings where it is not possible or practical to have someone present at all times.
Benefits of Wireless Temperature Sensors
Wireless temperature sensors offer a number of benefits for temperature monitoring applications.
First, they are wireless and can be placed in difficult-to-reach locations.
Second, they are often part of the IoT (Internet of Things), which means that they can be monitored remotely.
Third, wireless temperature sensors can take frequent readings, which helps to ensure that temperatures are within the desired range.
Fourth, wireless temperature sensors can trigger alarms if temperatures exceed a certain threshold. This helps to prevent damage to equipment or product.
Finally, wireless temperature sensors can provide valuable data for trend analysis and process improvement.
As a result, wireless IoT sensors offer a number of advantages for business organizations in virtually every industry.
How do Wireless Temperature Sensors Work?
Wireless temperature sensors are becoming an essential part of operations management for most all businesses.
By remotely monitoring the temperature of equipment, wireless sensors can help to ensure that temperatures are where they need to be. But how do these devices work?
Each wireless temperature sensor includes a common wireless sensor components such as processor, power source (usually battery), radio sending unit and a sensing device. These sensors take measurement readings around the clock and transmits these readings in real-time to a central gateway.
The gateway is a small network device connected to the internet and typically resides in a central location. The range of the Swift Sensors gateway is 300 ft. and one gateway can support up to 150 sensors. The sensor sends a temperature reading in the form of a wireless signal to the gateway. The gateway then forwards the data to the cloud.
From there, the data can be accessed and analyzed via a mobile app, web portal, desktop, laptop, etc. With this temperature information, users can track trends over time and make adjustments as needed to maintain proper temperature requirements.
Additionally, Swift Sensors can even send alerts if the temperature falls outside of a certain range, helping to prevent against property damage or health risks.
Wireless temperature sensors are an essential part of today’s connected world, and they are only becoming more prevalent as businesses demand better insights into their operations.
What Industries use Wireless Sensors?
Wireless temperature sensors are commonly used in restaurants, schools, industrial manufacturing plants, medical labs, and facility management.
They offer many benefits over traditional wired sensors, including improved accuracy, easier installation, and remote monitoring capabilities.
In the restaurant industry, wireless temperature sensors are often used to monitor food storage areas, cookery areas, and serving areas. This helps to ensure that food is kept at safe temperatures throughout the entire preparation and serving process.
In schools, wireless temperature sensors are commonly used in cafeterias to ensure that food is stored and prepared at correct temperatures.
In industrial settings, wireless temperature sensors are often used to monitor environmental conditions in factories and other workplaces. This helps to ensure that employees are working in a safe and comfortable environment.
In medical labs, wireless temperature sensors are commonly used to monitor refrigerators, freezers, and incubators. This helps to ensure that sensitive medical samples are stored at the correct temperature.
In facility management, wireless temperature sensors are often used to monitor HVAC systems and water heaters. This helps to ensure that buildings are being heated or cooled properly and that hot water is always available.
Why Choose Swift Sensors?
Swift Sensors Wireless Temperature Monitoring solution has proven to be more reliable and cost-effective than traditional wired temperature sensors. Our customers have utilized the data collected by our sensors to improve their production processes, optimize energy usage, and reduce costs.
If you would like to learn more about how our solutions can benefit your business, please contact us today to speak with one of our experts. Click to learn more about our wireless temperature sensors.